Published on May 4, 2023
Capturing high-quality raw scans during the data acquisition stage is crucial because post-processing cannot always improve the quality of poorly scanned data. What can you do to ensure you get high-quality 3D scan data prior to post-processing?
Read this post ⟶
Published on January 3, 2023
Handheld 3D scanners are widely adopted as a trusted measurement instrument for full-body scan analysis. We’ll explain how the technology works and our recommendation for a 3D body scanner.
Read this post ⟶
Published on September 28, 2022
Are you on the search for a 3D scanner for work and don’t know where to start? We have a list of questions to help you figure it out.
Read this post ⟶
Published on May 24, 2022
With more than 15+ years in the 3D scanning industry, Paul wants to show you the best practices of reverse engineering a physical part into parametric CAD.
Read this post ⟶
Published on May 9, 2022
Are there any Scan to CAD Software that doesn’t break the bank? We’ll show you three Scan to CAD tools that are not only affordable but also easy to use.
Read this post ⟶
Published on March 21, 2022
3D scanning software often gets overlooked when it comes to buying a 3D scanner. We’ll give you 5 reasons why the power is actually in the software.
Read this post ⟶
Published on June 2, 2021
We’ll be focusing our discussion around a project we’ve recently been working on. We’ll show you the step-by-step process of how to reverse engineer a part from scan data to CAD and reveal the final results.
Read this post ⟶
Published on April 27, 2021
Did you know you can easily add more detail and accuracy to your 3D models by combining scan data from multiple scanners? We’ll show you how to process and combine scan data from all five Artec 3D scanners.
Read this post ⟶
Published on March 24, 2021
It’s not easy to capture all the fine details while getting an accurate 3D model at such a small scale. In this webinar, we’ll dive into common questions about 3D scanning small objects, as well as cover what types of issues you would likely encounter and how to solve them.
Read this post ⟶
Published on March 19, 2021
While 3D scanners scan most objects without a hitch, there are surfaces that are more challenging to scan. Here are some tips on how to scan difficult parts.
Read this post ⟶
Published on February 4, 2021
Getting bogged down by long 3D scanning sessions impact productivity, and can be a pain to process on the computer. In this webinar, our experts will give you the inside scoop on how to optimize your 3D scanning workflow.
Read this post ⟶
Published on January 20, 2021
In this webinar, we discuss best practices and ways to tackle common 3D scanning problems including how to scan dark, shiny, and clear surfaces. Come out of this session knowing how to make your work a lot easier, faster, and get better results.
Read this post ⟶
Published on October 21, 2020
Decimating 3D scan data means you are reducing the number of polygons in your 3D mesh. We’ll show you how it’s done and why it’s beneficial.
Read this post ⟶
Published on August 14, 2020
Sometimes, you want to take advantage of using color scans when converting scan data to CAD. In this article, we’ll explain the benefits and how it’s done.
Read this post ⟶
Published on October 8, 2019
Learn why a 3D scanner is an invaluable measurement tool for conducting surface deviation analysis and the different types of 3D inspection that can be conducted with scan-to-inspection software.
Read this post ⟶
Published on January 22, 2019
In this tutorial, we are going to demonstrate the 3D scanning to 3D printing process by taking a squirrel skull and making it twice the original size.
Read this post ⟶
Published on November 8, 2018
You’ve done the research and have come to the conclusion that having a 3D scanner will help you tremendously with your work. How do you present the value of a 3D scanner to your manager so they will approve the purchase?
Read this post ⟶
Published on October 30, 2018
This test demonstrates the Scan to CAD process by reverse engineering an industrial part quickly within a 0.01” tolerance using two different packages.
Read this post ⟶