Published on November 20, 2024
Artec has launched two new handheld scanners: the Point and Spider II. If your project requires high accuracy and resolution, it’s worth checking them out.
Read this post ⟶
Published on July 17, 2024
A letter from Paul Motley, Operations Manager of GoMeasure3D, reflecting on this remarkable milestone.
Read this post ⟶
Published on July 15, 2024
Paul, Operations Manager of GoMeasure3D, is proud to announce that our company has once again achieved the status of Artec’s Gold-Certified Ambassador this year.
Read this post ⟶
Published on February 27, 2024
With the release of the new Apple Vision Pro, we are excited that Apple has finally entered into the VR/AR/MR headset market. We’ll take a closer look at this new device and how 3D scanning can fuel the creation of 3D assets.
Read this post ⟶
Published on July 3, 2023
Do you have a 3D scanner you’ve been wanting to upgrade and just waiting for the right time? Now is the chance! Get $5,000 off a new Artec Leo handheld 3D scanner when you trade-in your existing 3D scanning device—available for a limited time. The offer is valid until December 29, 2023.
Read this post ⟶
Published on April 7, 2023
Want to see a personalized Artec 3D scanner demonstration without leaving your desk? You can, when you book a web demo with us! As a bonus, our new online booking system makes it super easy to schedule an appointment. Currently available for bookings anywhere in the US 🇺🇸
Read this post ⟶
Published on December 20, 2022
We hope you made many wonderful memories in 2022. We want to take this time to wish you Happy Holidays and all the best to come in 2023! We’ll only be closing our offices for two days during the Holidays. If you have any last-minute questions or purchases, please feel free to contact us.
Read this post ⟶
Published on December 22, 2021
This year, we thought it would be fun to scan a few of our favorite things in 3D for the Holidays! Check out the entire 3D scanning process from start to finish in less than 10 minutes!
Read this post ⟶
Published on April 2, 2021
In our upcoming webinar, we’ll show you how to use two or more Artec 3D scanners and merge the results to get the best of each system.
Read this post ⟶
Published on March 8, 2021
3D scanning small objects can be a challenging project, even for advanced users. In this webinar, we’ll explain how small you can scan with a 3D scanner and tips on getting the best results.
Read this post ⟶
Published on January 15, 2021
Getting bogged down by long 3D scanning sessions impact productivity, and can be a pain to process on the computer. In our next live webinar, our experts will give you the inside scoop on how to optimize your 3D scanning workflow. The webinar is now available to watch on demand.
Read this post ⟶
Published on December 23, 2020
Our Operations Manager, Paul Motley, reflects back on 2020. This year presents its own set of challenges early on. However, it made our team stronger than ever before.
Read this post ⟶
Published on December 7, 2020
In our upcoming webinar, our team will discuss best practices and ways to tackle common 3D scanning problems. Come out of this session knowing how to make your work a lot easier, faster, and get better results. The webinar is now available to watch on demand.
Read this post ⟶
Published on November 2, 2020
Showcasing the latest 3D technologies recently released in 2020: AI-Powered Artec Eva handheld 3D scanner and Geomagic Control X Essentials affordable inspection software. Webinars are now available to watch on demand.
Read this post ⟶
Published on October 14, 2020
Artec unleashes the power of what AI-powered Eva and Leo handheld 3D scanners can achieve with the release of Artec Studio 15.1 with HD mode.
Read this post ⟶