GoMeasure3D, Inc.

General Terms and Conditions of Sale

For the purposes of these Terms and Conditions of Sale, the term ‘contract’ shall mean the agreement between GoMeasure3D, Inc. (‘Supplier’) and Buyer arising as a result of Buyer’s submission of an order for Supplier’s products. Such contract shall be deemed to incorporate and be governed by these Terms and Conditions. THESE TERMS AND CONDITIONS SHALL TAKE PRECEDENCE OVER ANY TERMS AND CONDITIONS THAT APPEAR IN BUYER’S ORDER OR IN ANY DOCUMENTS INCORPORATED BY REFERENCE IN BUYER’S ORDER. No term or condition of Buyer’s order additional to or different from these Terms and Conditions shall become part of the contract unless explicitly agreed to in writing by Supplier. Retention by Buyer of any products delivered by Supplier, or payment by Buyer of any invoice rendered hereunder, shall be conclusively deemed acceptance of these Terms and Conditions. Supplier’s failure to object to any provision contained in any communication from Buyer shall not be construed as a waiver of these Terms and Conditions, nor as an acceptance of any such provision. The term OEM (original equipment manufacturer) shall mean themanufacturer the product or software was purchased from by Supplier to resell to the Buyer.

1. Quotations: Prices, specifications and dates for delivery referenced in Supplier’s quotations are for information purposes only and shall not be binding on Supplier until all technical requirements have been agreed and Supplier has accepted Buyer’s order.  Then Buyer must allow reasonable time for delivery.  Quotations terminate if not accepted by Buyer within 30 days, unless a different period is specifically agreed to between Buyer and Supplier.
2. Orders: By submitting an order to Supplier, Buyer agrees to be subject to these Terms and Conditions of Sale in their entirety. All orders must be bona fide commitments showing definite prices and quantities and mutually agreed shipping dates. No order, whether or not submitted in response to a quotation by Supplier, shall be binding upon Supplier until accepted in writing by Supplier.
3. Prices and Taxes: Prices do not include federal, state or local taxes, including without limitation sales, use or excise taxes now or hereafter enacted, applicable to the products sold in this transaction, which taxes may, in Supplier’s discretion, be added by Supplier to the sales price or billed separately and which taxes shall be paid by Buyer unless Buyer provides Supplier with any necessary tax exemption certificate.  Sales tax will otherwise be collected for the Commonwealth of Virginia, USA or any state Supplier has a physical presence.
4. Shipment and Delivery: All products will be shipped F.O.B. origin from Supplier’s or OEM’s premises and may be so shipped in several lots. . – Buyer is responsible for all shipping charges to include, but not limited to, Duties, Customs, Taxes, etc.  In the absence of specific instructions, Supplier will select the carrier and ship “collect”, but shall not be deemed thereby to assume any liability in connection with the shipment nor shall the carrier be construed to be the agent of Supplier. Buyer must provide it’s own insurance. Title and risk of loss or damage to all products sold hereunder shall pass from Supplier to Buyer upon delivery by Supplier to the possession of the carrier, provided that Supplier reserves a purchase money security interest in the products. Any claims for loss, damage or failed delivery thereafter shall be filed with the carrier. All products shall be deemed finally inspected and accepted within ten (10) days after delivery unless notice of rejection is given in writing to Supplier within such period. Acceptance shall constitute acknowledgement of full performance by Supplier of all obligations under the contract except as stated at Section 9 (Warranties).
5. Terms of Payment:
   • A. Each shipment shall be a separate transaction and Buyer will be invoiced on date of dispatch. Unless otherwise stated on Supplier’s invoice, terms of payment shall be net thirty (30) days from date of invoice. Supplier may, in its sole discretion, determine at any time that Buyer’s financial condition requires payment in advance, and, if such requirement is not met, may cancel the order or any part thereof.
   • B. Seller reserves the right to charge interest, or a fee in lieu of interest, at the highest rate allowed by the law on all overdue accounts, plus all costs associated with the collection of such overdue accounts (including, without limitation, attorneys’ fees), with each fraction of a month counted as a full month.  Whenever Seller in good faith deems itself insecure, Seller may cancel any outstanding purchase order with Buyer; decline to make delivery of products to Buyer; revoke any extension of credit to buyer; reduce any unpaid debt by enforcing its security interest, created hereby, in all products (and proceeds therefrom) furnished by Seller to Buyer; and take any other steps necessary or desirable to secure Seller fully with respect to Buyer’s payment for products and services furnished or to be furnished by Seller.
6. Contingencies: Supplier shall not be liable for any delay in delivery or for non-delivery, in whole or in part, caused by the occurrence of any contingency beyond the control of Supplier, including, by way of illustration but not limitation, war (whether an actual declaration thereof is made or not), sabotage, insurrection, riot or other act of civil disobedience, act of a public enemy, failure or delay in transportation, act of any government or any agency or subdivision thereof, judicial action, labor dispute, accident, fire, explosion, floods, storm or other act of God, shortage of labor, fuel, raw material or machinery or technical failure where Supplier has exercised ordinary care in the prevention thereof. If any such contingency occurs, Supplier may allocate production and deliveries among Supplier’s customers.
7. Equipment: OEM may modify specifications provided the modifications do not adversely affect the performance of the equipment to be supplied under the contract (“the equipment”). In addition, OEM may furnish suitable substitutes for materials unobtainable because of priorities or regulations established by government authority, or availability of materials from suppliers.
8. Software: OEM shall at all times have and retain title and full ownership of all software, firmware programming routines, and documentation thereof supplied by OEM for use with the equipment, and of all copies thereof made by Buyer (collectively “software”). OEM grants Buyer a non-exclusive and non-transferable license to use such software solely for use with the equipment. Buyer shall take all reasonable steps to protect OEM’s proprietary interest in the software and shall not transfer or otherwise provide the software to any third party.
9. Limitation of Warranties:
   • A.Generally all hardware computer components supplied by OEM  are covered by a limited one year warranty from the manufacturer or OEM covering parts and labor for hardware only and on a depot basis. Supplier specifically disclaims any and all warranties, express or implied, including but not limited to any implied warranties or with regard to any licensed products. We shall not be liable for any loss of profits, business, goodwill, data, interruption of business, not for incidental or consequential merchantability or fitness of purpose, damages related to this agreement
   • B. If Buyer shall fail to pay when due any portion of the purchase price or any other payment required from Buyer to Supplier under this contract or otherwise, all warranties and remedies granted under this Section 9 may, at Supplier’s option, be terminated.
   • C. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES AND COVENANTS, EXPRESS OR IMPLIED, WITH RESPECT TO THE EQUIPMENT AND ANY DEFECTS THEREIN OF ANY NATURE WHATEVER, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SUPPLIER SHALL NOT BE LIABLE FOR, AND BUYER ASSUMES ALL RISK OF, ANY ADVICE OR FAILURE TO PROVIDE ADVICE BY SUPPLIER TO BUYER REGARDING THE EQUIPMENT OR BUYER’S USE OF THE SAME. UNDER NO CIRCUMSTANCES SHALL SUPPLIER BE LIABLE TO BUYER UNDER ANY TORT, NEGLIGENCE, STRICT LIABILITY, OR PRODUCT LIABILITY CLAIM AND BUYER AGREES TO WAIVE SUCH CLAIMS. SUPPLIER’S SOLE AND EXCLUSIVE LIABILITY, AND BUYER’S SOLE AND EXCLUSIVE REMEDY, FOR ANY NONCONFORMITY OR DEFECT IN THE PRODUCTS OR ANYTHING DONE IN CONNECTION WITH THIS CONTRACT, IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL BE AS SET FORTH IN SUBSECTION 9A HEREOF AS LIMITED BY SUBSECTION 9B HEREOF. THIS EXCLUSIVE REMEDY SHALL NOT HAVE FAILED OF ITS ESSENTIAL PURPOSE (AS THAT TERM IS USED IN THE UNIFORM COMMERCIAL CODE) PROVIDED THAT THE SUPPLIER, PROVIDED THE OEM REMAINS WILLING, TO REPAIR OR REPLACE DEFECTIVE EQUIPMENT (AS DEFINED IN SUBSECTION 9A) WITHIN A COMMERCIALLY REASONABLE TIME AFTER RECEIVING SUCH EQUIPMENT. BUYER SPECIFICALLY ACKNOWLEDGES THAT SUPPLIER’S PRICE FOR THE EQUIPMENT IS BASED UPON THE LIMITATIONS OF SUPPLIER’S LIABILITY AS SET FORTH IN THIS CONTRACT.
10. Limitation of Liability and Buyer Indemnity: IN NO EVENT, REGARDLESS OF THE FORM OF ACTION, SHALL SUPPLIER BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL LOSSES OR DAMAGES ARISING OUT OF THE SALE OF ITS PRODUCTS TO BUYER OR ARISING OUT OF ANYTHING DONE IN CONNECTION WITH THE CONTRACT, INCLUDING, BUT NOT LIMITED TO, LOSSES OR DAMAGES ARISING OUT OF CLAIMS FOR LOSS OF USE, BUSINESS, GOODWILL, OR PROFITS, AND CLAIMS ARISING OUT OF THIRD PARTY ACTIONS, REGARDLESS OF WHETHER SUCH THIRD PARTY ACTIONS, OR ANY OTHER CLAIMS, LOSSES, OR DAMAGES, WERE REASONABLY FORESEEABLE TO BUYER OR SUPPLIER. BUYER’S EXCLUSIVE REMEDY ARISING OUT OF ITS PURCHASE AND USE OF SUPPLIER’S PRODUCTS, OR ARISING OUT OF ANYTHING DONE IN CONNECTION WITH THE CONTRACT, SHALL BE FOR DAMAGES AND NO CLAIM OR CLAIMS OF ANY KIND, WHETHER BASED UPON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, WARRANTY AND STRICT LIABILITY), STATUTORY OR REGULATORY PROVISIONS, INDEMNITY, CONTRIBUTION, OR OTHERWISE, SHALL BE GREATER IN AMOUNT IN AGGREGATE THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT OF WHICH DAMAGES ARE CLAIMED.
11. All training needs to be prepaid and held within six months of purchase or training and funds will be forfeited.
12. Property will be deemed abandoned and thus become property of the Supplier if left on premises more than 90 days.
13. Buyer shall indemnify and hold harmless Supplier, its officers, agents, employees, subsidiaries, parents, affiliates and insurers from and against any and all liabilities, damages, losses, claims, lawsuits, including costs and expenses in connection therewith, for death or injury to any persons or loss of any property whatsoever, caused in any manner by Buyer’s possession, use or operation of equipment.
14. Proprietary Information: Buyer represents that it has adopted reasonable procedures to protect Proprietary Information, as defined hereafter, including binding agreements with employees and consultants to prevent unauthorized publication, disclosure or use of such during or after the term of their employment by or services for Buyer. Buyer shall not use Proprietary Information except as required for the use of the equipment, shall not disclose Proprietary Information to any third party, and shall not transmit any documents or copies thereof containing Proprietary Information to any third party, except as may be authorized in writing by Supplier. This Section 12 shall survive termination of the contract.”Proprietary Information” shall mean information or data of Supplier, or a third person to whom Supplier owes obligations of confidentiality, and which is furnished or to be furnished to Buyer in written, graphic or machine-readable form and is marked proprietary or confidential. Where copies or alternative forms of information or data are received from Supplier, such information or data shall be considered Proprietary Information if at least one of said copies or alternative forms is marked proprietary or confidential. This Section 12 shall not apply to information which Buyer demonstrates was in Buyer’s possession prior to receipt from Supplier or information which Buyer demonstrates is or has become available to the public or general knowledge in the industry otherwise than through the fault of Buyer.
15. Rescheduling and Cancellation: All orders are non-cancellable and non-returnable. Supplier shall have the right without penalty or payment to cancel any order accepted (i) if Buyer fails to make any payment when due to Supplier under the contract or any other contract (ii) if Buyer violates any of these Terms and Conditions, or (iii) if Buyer’s credit becomes impaired. Buyer may reschedule any order at the discretion of the Supplier.
16. Non-Waiver: Remedies: No waiver of any breach of these Terms and Conditions shall constitute a waiver of any prior or subsequent breach of any similar or dissimilar provision or a modification of the contract. All Supplier rights and remedies, whether evidenced hereby or by any other contract or document, shall be cumulative and nonexclusive and may be exercised singularly or concurrently.
17. Applicable Law and Actions to Recover Damages: These Terms and Conditions have been created with reference to the laws of the Commonwealth of Virginia, USA. If any provision of these Terms and Conditions is held to be unenforceable, such holding shall not affect the enforceability of any other provision. Any legal presumption that terms in this contract shall be strictly construed against the party who drafted such terms or who benefits from such terms shall not be employed in construing and interpreting this contract. Prior to commencement of any legal proceedings, Buyer and Supplier shall meet at a senior level to attempt to resolve differences. Notwithstanding any attempts to resolve differences or negotiations regarding such differences, any action brought by Buyer against Supplier arising out of this contract or Buyer’s purchase and use of the equipment must be commenced within one year.
18. Export: Regardless of any disclosure made by Buyer to Supplier of the ultimate destination of Supplier products, Buyer shall not export either directly or indirectly any Supplier product, or any system incorporating said product either in contravention of statute or regulation or without first obtaining all required licenses and permits from any relevant governmental agencies or departments.
19. Assignment: The contract shall be binding upon and inure to the benefit of the parties and their respective legal representatives, successors and permitted assigns. The contract is personal to Buyer, and Buyer may not assign any of its rights or delegate any of its obligations thereunder, in whole or in part, without the prior written consent of Supplier which may be withheld for any reason.
20. Complete Agreement; Modifications: This contract constitutes the entire agreement between the parties relating to the sale of the equipment and no addition to or modification of any provision of said agreement shall be binding upon Supplier unless agreed in writing by Supplier.
21. Notices: All notices given under the contract shall be in writing, mailed by first class mail, certified or registered or delivered by hand to the address of the other party set forth in the quotation or to such other address as such party may designate from time to time by such notice, and shall take effect when received.